Skip to content

What Water Hardness Means and How It Is Measured

Up to date as of November 17, 2026

Hardness is a measure of dissolved minerals. The number looks simple, but it comes in several units, and a figure in one unit can't be compared with a limit in another until you convert it.

What hardness is

  • The cause. The U.S. Geological Survey says hardness is caused by compounds of calcium and magnesium, and by a variety of other metals1.
  • Why machine owners care. Hard water can leave limescale behind. The page on how scale forms has the detail.
  • Not one fixed number. There isn't a single "right" hardness. Each maker sets its own range, if it sets one at all.

The units you'll meet

Wikipedia lists the common ones as German degrees (°dH), parts per million (ppm, mg/L, or American degrees) and grains per gallon (gpg)2. Here's what each means.

  • ppm and mg/L. Parts per million is usually defined in terms of calcium carbonate2. Written as mg/L without a named compound, it's the same figure2.
  • Grains per gallon (gpg). A grain is a small unit of weight. One grain per gallon equals 17.118 ppm2. So multiply a gpg figure by 17.118 to get ppm.
  • German degrees (°dH or dGH). One degree equals 17.848 ppm2. So divide a ppm figure by 17.848 to get degrees dH.
  • Other degrees. Wikipedia also lists English (Clark) and French degrees2. Check which one a document means before you compare.
Reading a hardness figureFind the hardness figureCheck which unit it usesConvert it if the units differCompare it with your manual
Check the unit before you compare any numbers.

The usual groups

The U.S. Geological Survey gives general guidelines for classifying water, as mg/L of calcium carbonate1.

Group Hardness in mg/L (ppm)
Soft 0 to 601
Moderately hard 61 to 1201
Hard 121 to 1801
Very hard more than 1801

These are general labels for classifying water. They aren't a machine limit. Your maker may name its own range or its own levels, so check the manual before you decide anything.

Test strips and machine levels

Some makers supply a strip with the machine and skip the numbers entirely. One maker tells owners to immerse the test in a glass of water and wait a few seconds to identify the water hardness level3. You then enter that level in the machine's menu.

That's a different scale from ppm. A "level" is the maker's own step, not a unit on a water report. Don't swap one for the other. If you have both a report figure and a strip, follow the manual for which to use.

A worked way to compare

Say your manual gives a limit in one unit and your report uses another. Don't guess. Convert the report's figure with the factors above, then compare the two. If the figure sits near the limit, ask the maker rather than rounding in your favor.

Be careful with the word "degrees" too. It can mean German, English or French degrees, and they aren't the same size2. A figure with no unit is close to useless.

A quick checklist

  • Write down the number and the unit together, every time.
  • Convert only when the units differ, and use the factors above.
  • If the manual gives a level instead of a unit, use the maker's strip or method.
  • Need your local figure? The next page covers where it comes from.

Where the facts come from

  1. Hardness of Water, U.S. Geological Survey
  2. Hard water, Wikipedia
  3. How to check the water hardness before making a coffee?, De'Longhi US