How to Find Your Tap Water Hardness
You've got three places to look. Start with the cheapest and work down.
1. Your water supplier
Your supplier knows the water it sends out. In the United States, the Environmental Protection Agency requires community water systems to deliver a Consumer Confidence Report, also called an annual drinking water quality report, to their customers1. That's a US rule. Other countries have their own arrangements, and this page doesn't cover them.
- Timing. US reports must be sent by your water supplier each year by July 11.
- If you didn't get one. You can call your local water supplier, or use the search tool on the EPA's site1.
- Renters and apartments. If you don't have the report, ask the supplier.
- Outside the US. Ask your local water company or utility what it publishes.
The U.S. Geological Survey says information about hardness at a home or local area should come from the local health agency or local water utility2. So a phone call is a fair next step.
2. What to look for on the report
- A hardness line. The EPA's list of what a report contains doesn't name hardness1. It may be there anyway, or it may not. If it's missing, ask the supplier for the figure.
- The unit. Is it ppm, mg/L, grains per gallon or degrees? What water hardness means shows how to convert between them.
- The date. Water can change. Note which year the report covers.
3. A test strip or kit
Some machine makers include a strip or kit. One maker tells owners to immerse the water hardness test in a glass of water, and to use the same water they'll use for their daily coffees3. Another recommends using the testing kit that comes with its machine before you use the machine4.
Tips for a fair reading:
- Test cold water from the tap, from a filter cartridge or from a bottle. One maker says not to test hot water or water from the machine4.
- Test the same water you'll pour in the tank. If you'll use filtered water, test that.
- Follow the instructions on the strip or kit itself, since each is different.
- Write down the result in the strip's own scale. Some strips give levels rather than ppm.
Which one to trust?
| Source | What you get | Watch out for |
|---|---|---|
| Supplier's report | A figure for the supplier's water | May cover a wide area, not just your street |
| Supplier's phone line | Whatever figure the supplier can give for your address | Ask which unit it's in |
| Maker's strip or kit | A reading for the water you test | Reads in the maker's own levels or units |
If your manual asks for a hardness setting, use the method the manual names. If the strip and the supplier don't match, the manual's method decides what you enter in the machine.
Next, open your manual's water section. This guide shows where to look.
Where the facts come from
- CCR Information for Consumers, U.S. Environmental Protection Agency
- Hardness of Water, U.S. Geological Survey
- How to check the water hardness before making a coffee?, De'Longhi US
- Water solutions for your espresso machine, La Marzocco Home New Zealand